HDX HDXBR50 Gebrauchs- und Pflegehandbuch PDF herunterladen (Seite 8)

Troubleshooting

Air leaking at trigger

valve area.

O-rings in trigger valve housing are

damaged

Replace O-rings.

Air leaking between

housing and nose.

Loose screws in housing

Damaged O-rings

Damaged to bumper

Tighten screws

Replace O-rings

Replace bumper

Air leaking between

housing and cap.

Loose screws

Damaged gasket

Worn bumper

Dirt in nose piece

Dirt or damage prevent fasteners

or pusher from moving freely in

magazine

Damaged pusher spring

Inadequate air flow to tool

Worn O-ring on piston or lack

of lubrication

Damaged O-ring on trigger valve

Air leaks

Cap seal leaking

Tool skips driving

fastener

Possible cause(s) Corrective action

Tool not lubricated sufficiently

Broken spring in cylinder cap

Exhaust port in cap is blocked

Tool runs slow or has

loss of power

Guide on driver is worn

Fasteners are not correct size

Fasteners are bent

Magazine or nose screws are

loose

Driver is damaged

Fasteners are

jammed in tool

Replace bumper

Clean drive channel

Clean magazine

Replace spring

Check fitting, hose, or compressor

Replace and lubricate O-rings

Replace O-rings

Tighten screws and fittings

Replace gasket

Replace guide

Use only recommended fasteners

Replace with undamaged fasteners

Tighten screws

Replace driver

Lubricate nailer

Replace spring

Replace damaged internal parts

Tighten screws

Replace gasket

Problems

Question, Problems, missing parts? Before returning to the store,

call HDX Customer Service

8 a.m - 6 p.m, EST, Monday- Friday

1-800-514-6729

HOMEDEPOT.COM

Retain this manual for future use.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

HDX HDXBR50 Gebrauchs- und Pflegehandbuch Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nagelpistole HDX HDXBR50